Archive for the ‘bridge dentistry’ Category
Dr Fox – Bridges
Dr. Steven Fox, DDS, FICD,FACD, PC.
Learn more about cosmetic dentistry at http://www.drstevefox.com/
Duration : 0:1:2
Dentistry abroard….anyone recomend where to go for the best and most reasonably priced dentistry?
abroard. I have always looked after my teeth by regularly going to the dentist. Unfortunately most of my problems have been genetic, and I started getting real problems when I was forty, up until then I had a great set of teeth which people commented on.
I have now come to an age and a stage where my gums have receeded and my top bridge is looking horrible
I am now on a pension so money is really tight and I have been quoted around £8,000.00 to have a full set of upper teeth connected by implants to replace my bridges.
There is no way on earth I can afford this, and the thought of a denture that comes out is just horrific to me.
Anyone know where I can go and have this work done, at a reasonable price, I’m getting really paranoid about my teeth and it’s stopping me smiling as I used to through embarrassment. HELP.
I need a full top denture affixed by four implants not individual implants.
I would shop around first in the UK. There are a lot of Polish dentists in the UK who are now offering much cheaper implants than ever before. This has only just started happening over the past year or so. I’ve seen pricing at 500 UK pounds per implant.
Dental prices are actually coming down for once after years of rip-off – probably because of the Polish dentists in the UK. Although you can have a cheaper operation abroad, once you factor in the cost of hotels, travel, and in your case multiple visits to another country, you won’t be much further ahead for all the risk. Implants can go wrong. Sometimes they just don’t take properly. You also will need two or three visits so the implants can set and heal before they insert the crowns.
I found a web site that actually compares the cost of a UK implant with going to Budapest in Hungary.
http://www.smartahealth.com/off_shore.html
If you do choose to get implants abroad, make sure they insert implants from a reputable manufacturer such as Noble biocare or Astratek. Many eastern european countries use non – standard screws and appliances. Anything goes wrong and you are – pardon the pun – screwed. Of course, once you specify a standard appliance the price goes up, because the dentist needs to buy the materials from a european or US manfacturer.
Failing that, go back to your original dentist and be totally upfront and ask if you can be available a short notice for cancellations etc. and work with them on the price.
Dental Implant or Bridge? – Cosmetic Dentist in Philadelphia
Thomas W. Gamba, D.D.S., P.C.
http://www.docgamba.com
866.402.2582
A dental implant is different than a bridge. A fixed bridge is something that is cemented into your mouth on top of your teeth, that replaces a missing tooth. So if you had one missing tooth, we would prepare the teeth on either side of the space, put a crown on each of those teeth, and connect it to a false tooth in the middle, that would replace your missing tooth. A dental implant is much better, because you don’t have to touch the teeth on either side of the space to anchor an implant. The implant is placed directly in the space where the tooth was extracted.
If you have a missing tooth or missing teeth, they can be restored with dental implants. Come into our office and we’ll give you a complimentary consultation, tell you what your options are, and explain the procedure to you.
Thomas W. Gamba, D.D.S., P.C.
Medical Tower Building
255 South 17th Street
Suite 2807
Philadelphia, Pa 19103
866-402-2582
twgamba@mac.com
Duration : 0:1:6
Dental Health : What Is a Dental Bridge?
A dental bridge is a type of crown that is used to span an empty space between two teeth, which usually occurs after a tooth has been extracted. Learn how dental bridges are used to help patients chew with help from a licensed dental assistant in this free video series on the dental profession.
Expert: Michelle McPhail
Contact: www.MySolutionz.com
Bio: Michelle McPhail has been a licensed dental assistant for more than seven years. She currently works at My Solutionz in Florida as the dental treatment coordinator.
Filmmaker: Christopher Rokosz
Duration : 0:1:37
In dentistry, what is the difference between a filling, a crown, a bridge and an implant?
Are there other ones I’m missing?
A filling is either a metal or plastic material that is placed in the tooth once the decay has been drilled out. It saves the most tooth structure.
A crown is a porcelain "cap" that covers a tooth when the decay is too large for a filling. They drill the tooth down to basically a nub and then cover it with the tooth like "cap".
A bridge is basically 3 crowns. They are used to replace a missing tooth. Two crowns go on both teeth that are next to the missing tooth. Then there is a solid porcelain "fake tooth" that goes in the middle.
An implant is where they drill a porcelain "fake tooth" into your jaw bone to replace a missing tooth. It’s better than having a bridge in my opinion b/c then you don’t have to "cap" or put crowns on healthy teeth.
A partial is a retainer that has a tooth or a few teeth on it and it also replaces missing teeth. It is removable however.
Short demonstration of techniquehow much does a bridge or tooth partial cost?
dentistry fake tooth
I’d expect around $2500 for a bridge, about $1000 for a partial and $3000 for a implant.
Dentistry, I had a pre – molar removed. Should i get an implant ?
twenty years ago i had braces and those pre – molars were supposed to come out anyway. I declined however and found another orthodontist who did not ask me to have them removed.Would it make sense to spend all that money now on an implant ?I dont want a bridge.
As the type of dentist that did dental implants, I would highly advise you to go with the implant. The implant is the best choice for several reasons. First, by doing an implant, the adjacent teeth that would have been prepared ("cut down") to create the abutments needed to support the bridge will remain solid and healthy. Second, from a hygiene point of view, it is much easier to clean between and implant and the adjacent teeth than it is to clean under and around a bridge. You can floss an implant like a regular tooth. To properly clean with a bridge, you must find some way to thread floss underneath the bridgework to remove a debris buildup. Third, at one time the cost of placing an implant and then restoring it with a crown would have been prohibitively expensive (much more expensive than a 3-unit bridge). However, when I closed my office 18-months ago (because of an accident that prevents me from practicing any longer) my fees for doing a 3-unit bridge would have been $2400 ($800 per unit). My fee for the surgical placement of the implant, and then the subsequent placement of a crown 3-6 months later would have been $2500. As you can see, I had only a $100 difference between the too treatments. The beautiful thing was the fact that I was starting to get paid coverage of the implant procedure by the insurance companies. It took me a few years to convince them about the merits and benefits of implants, but finally they came around. Hope this helps.
Doc Brown
Should I accept this dentistry?
I have # 7 missing and ## 9 and 10 had large fillings. After consulting three dentists in my area I’ve decided to replace a lost tooth with a fixed three-unit bridge (on 6, 7, and 
and put crowns on 9 and 10. When I arrived at my dentist for the permanent bridge and crowns to be put on, the dentist placed the five-unit fixed bridge. I noticed that this is not what we had planned. The dentist called the lab; they came and got the bridge. In about 45 minutes they had my bridge cut in 3 pieces: three-unit bridge and two crowns. The dentist was ready to fit that permanently just as everything was going the way it supposed to. It was very disturbing to observe what was happening and I asked to have it put on temporary cement for now. Should I accept this dentistry? Are individual crowns and crowns that are part of a bridge made the same? What about the fact that this dentistry was worked on after it was finished. How do I know if the dentistry I’ve got would look as good as individual crowns I’ve asked for? One more thing, I’ve paid for five individual crowns.
It appears that the lab script was written up incorrectly, meaning the lab made the correct bridge, your dentist screwed up. Otherwise the dentist would have been highly upset with the lab, would have said something to you in regard to this and also "demanded a remake" of the whole case. You would have left using this "mistake bridge" in as a temp while waiting on a new bridge and single crowns to be made. No dentist ever pays for a "remake" to be done unless it’s completely obvious that it’s his fault. Labs are very flexible and want to keep the "good doctors" business so they take a lot from the dentist that they really shouldn’t. Dentist will always "blame it on the lab" even when it’s their mistake. So it sounds to me like your dentist made the mistake writing the case up and tried to cover for it getting the lab to do a "quick fix." Which labs do all the time for dentist. I would definitely ask for the complete case to be remade while you are wearing this one as a temp. Even though they may floss well and seem to fit good, the procelain has gone through stress being sectioned as it was. It may in the future fracture and then need to be remade only at your expense. Do not settle for this bridge and these crowns, you are getting shoddy work! Check with another dentist, they will tell you it would need to be remade. I’ve worked in dentistry all my life and not once had any dentist even try to pull something like this. My son works in a lab and laughed when he read this. This work is completely unexceptable and you should be furious with your dentist for even trying to seat this in your mouth! You might want to look around for a new dentist if this is the type of work he does. I hope I’ve been of some help and that you will take my advice. Good luck!
They don’t make 5 unit all porcelain bridges, only porcelain fused to metal for that large of a span.
Should I accept this dentistry?
I have # 7 missing and ## 9 and 10 had large fillings. After consulting three dentists in my area I’ve decided to replace a lost tooth with a fixed three-unit bridge (on 6, 7, and and put crowns on 9 and 10. When I arrived at my dentist for the permanent bridge and crowns to be put on, the dentist placed the five-unit fixed bridge. I noticed that this is not what we had planned. The dentist called the lab; they came and got the bridge. In about 45 minutes they had my bridge cut in 3 pieces: three-unit bridge and two crowns. The dentist was ready to fit that permanently just as everything was going the way it supposed to. It was very disturbing to observe what was happening and I asked to have it put on temporary cement for now. Should I accept this dentistry? Are individual crowns and crowns that are part of a bridge made the same? What about the fact that this dentistry was worked on after it was finished. How do I know if the dentistry I’ve got would look as good as individual crowns I’ve asked for? One more thing, I’ve paid for five individual crowns.
It appears that the lab script was written up incorrectly, meaning the lab made the correct bridge, your dentist screwed up. Otherwise the dentist would have been highly upset with the lab, would have said something to you in regard to this and also "demanded a remake" of the whole case. You would have left using this "mistake bridge" in as a temp while waiting on a new bridge and single crowns to be made. No dentist ever pays for a "remake" to be done unless it’s completely obvious that it’s his fault. Labs are very flexible and want to keep the "good doctors" business so they take a lot from the dentist that they really shouldn’t. Dentist will always "blame it on the lab" even when it’s their mistake. So it sounds to me like your dentist made the mistake writing the case up and tried to cover for it getting the lab to do a "quick fix." Which labs do all the time for dentist. I would definitely ask for the complete case to be remade while you are wearing this one as a temp. Even though they may floss well and seem to fit good, the procelain has gone through stress being sectioned as it was. It may in the future fracture and then need to be remade only at your expense. Do not settle for this bridge and these crowns, you are getting shoddy work! Check with another dentist, they will tell you it would need to be remade. I’ve worked in dentistry all my life and not once had any dentist even try to pull something like this. My son works in a lab and laughed when he read this. This work is completely unexceptable and you should be furious with your dentist for even trying to seat this in your mouth! You might want to look around for a new dentist if this is the type of work he does. I hope I’ve been of some help and that you will take my advice. Good luck!
They don’t make 5 unit all porcelain bridges, only porcelain fused to metal for that large of a span.